In compliance with British Standard (BS) 1564:1975,  the pressed steel sectional rectangular water tanks are designed to work under a pressure not greater than the static head corresponding to the depth of the tanks,  built up of pressed steel plates 1220 mm²  used to contain cold water,  hot water,  potable liquids,  certain oils and chemicals.

Tanks re constructed with external flanges, with a combined double flange at an angle of 45^° and 90^° to the plate on all four sides,  with the flange corners welded.

The BS 1564:1975 standard followed does not provide for tanks subject to earth or other external pressure other than wind pressure.  All tanks are supplied with open or closed top.

HIGH PRESSED STEEL TANK

Hot Dipped Galvanised (HDGI) Pressed Steel Sectional Water Tank
Project: Star Cruise Terminal

HDGI Pressed Steel Sectional Fire-fighting Water Tank

HDGI Pressed Steel Sectional Water Tank
Project: Star Cruise Terminal